B-TIMER for P21 / P31 / P41 - Safety at a Glance

B-TIMER

Filter cartridge change now safe, simple and economic!

The mini computer counts the operating hours and measures accurately the cartridge saturation.
Cartridge exchange due is clearly displayed. For all mobile BAUER compressors; also for upgrading!

Important where it counts!

Filter monitoring now for all mobile compressors with TRIPLEX-P 21, SUPER TRIPLEX-P 31 and P 41 filter systems without electronic compressor control - also for upgrading.

Via a highly sensitve special sensor the hour meter starts automatically at compressor start and stops counting automatically again if compressor stops.

On the four-part segment display the status of saturation of the cartridge can be followed up. If the remaining capacity is less than 20%, the last segment is flashing and instead of the operating hours the order number of the cartridge required is indicated. If the cartridge is saturated, all four segments are flashing.

The key symbol indicates that a maintenance is due. The letters A to C inform about the necessary maintenance kit.

Data Safe: The battery reading warns in time if battery change is required. The B-TIMER saves operating hours and maintenance intervals on its RAM in case of battery exchange or longer storage without battery.

Most simple mounting without piping or wiring - only screw driver required!

Extremely robust for global use even under toughest ambient conditions: dust- and splash proof, insensitive to salt, heavy insolation, high humidity and sand.

Most simple maintenance   Saturated? The key symbol indicates that a maintenance is due. The letters A to C inform about the necessary maintenance kit. (A = 500 h resp. 1 year; B = 1000 h resp. 2 years; C = 2000 h resp. 3 years) Data Safe! The battery reading warns in time if battery change is required. The B-Timer saves operating hours and maintenance intervals on its RAM in case of battery exchange or longer storage without battery. During standstill of the ompressor the B-Timer changes automatically to power save mode. The long-life lithium cell (3 V) lasts approx. 3 years (500 h1/year). Counts reliably the operating hours Via a highly sensitve special sensor the hour meter starts automatically at compressor start and stops counting automatically again if compressor stops. On the four-part segment display the status of saturation of the cartridge can be followed up. If the remaining capacity is less than 20%, the last segment is flashing and instead of the operating hours the order number of the cartridge required is indicated. If the cartridge is saturated, all four segments are flashing. Easy set-up For the initial operation the compressor data is entered via two operating keys. The menu does almost without language. Symbols make it easy to use.